<< 点击显示目录 >> 主页  mappVision帮助助手 > 机器视觉帮助 > mapp Vision  > 诊断 > 状态编号 > 图像采集的状态编号

本节中的主题：

•-2118451199：事件"{BlockedEvent}"被阻止，信息过多。

•-2118451198: 自上次报告以来，"{BlockedEvent}"事件已发生"{NumberOfBlockedEvents}"次。

•1102774275: 事件'{解除封堵的事件}'的封堵已解除。

•1102774276: CN（受控节点）已准备好运行。每次进入 ReadyToOp PLK 状态时，都会输入此信息。

•-1044709371: 图像传感器发生错误。

•-1044709370: 摄像机温度 ({Temperature}) 临界，模块未就绪。

•1102774279: SearchAcquisitionSettings 进程启动。

•1102774280: SearchAcquisitionSettings 进程已停止。

•1102774281: SearchAcquisitionSettings 进程已完成。发现焦点： {FucusInMilimetres} 毫米，{FocusIn10Micrometres} 10 微米。

•-2118451190: 焦点低于最小物距。

•-2118451189: 焦距超过最大物距。

•1102774284: 预览模式已启用。

•1102774285: 预览模式已禁用。

•1102774286：红外滤光片切换为"{值}"。

•-2118451185：检测到超过 0.5G 的冲击。

•-2118451184：输入的增益值"{EnteredValue}"无效；已调整为"{AppliedValue}"。

•-2118451183: 所选 FlashColor 不可用。

•-2118451182: 已启用渐晕校正，但没有可用的有效校准数据。

•-2118451181: 已启用温漂校正，但没有可用的有效校准数据。

---

Topics in this section:

•-2118451199: The event '{BlockedEvent}' was blocked, too many messages.

•-2118451198: The blocked event '{BlockedEvent}' has occured '{NumberOfBlockedEvents}' times since the last report.

•1102774275: The blockade was removed for event '{UnblockedEvent}'.

•1102774276: The CN (controlled node) is ready to operate. This message is entered every time ReadyToOp PLK state is entered.

•-1044709371: Image sensor error occured.

•-1044709370: Camera temperature ({Temperature}) critical, module not ready.

•1102774279: SearchAcquisitionSettings process started.

•1102774280: SearchAcquisitionSettings process stopped.

•1102774281: SearchAcquisitionSettings process finished. Focus found: {FucusInMilimetres} mm, {FocusIn10Micrometres} 10 micrometres.

•-2118451190: Focus is below min. object distance.

•-2118451189: Focus exceeds max. object distance.

•1102774284: Preview mode enabled.

•1102774285: Preview mode disabled.

•1102774286: IR filter switched to '{Value}'.

•-2118451185: Shock with more than 0.5G detected.

•-2118451184: Entered GainLevel value '{EnteredValue}' is invalid; value adjusted to '{AppliedValue}'.

•-2118451183: Selected FlashColor is not available.

•-2118451182: Vignetting correction enabled but no valid calibration data available.

•-2118451181: Temperature drift correction enabled but no valid calibration data available.