功能块 ViBaseLoadApplication 可用于将视觉应用程序从控制器加载到相机模块。视觉组件中的引用也会被设置为新的视觉应用程序。加载的视觉应用程序必须与模块上已有的视觉应用程序兼容。请参阅兼容性标准。
这需要一个视觉组件的引用（请参阅ViComponentType）和需要加载的视觉应用程序的名称。
信息：
如果成功将视觉应用程序加载到摄像机模块上，视觉组件中的引用也会设置为新的视觉应用程序。这意味着重启控制器后，上一个通过功能块成功加载的视觉程序将再次应用到摄像机上。
功能块
图功能块 ViBaseLoadApplication
Function block ViBaseLoadApplication can be used to load a vision application from the controller to a camera module. The reference in the vision component is also set to the new vision application. The vision application that should be loaded must be compatible with the vision application already on the module. See Compatibility criteria.
This requires a reference to a vision component (see ViComponentType) and the name of the vision application that should be loaded.
Information:
If the vision application is successfully loaded onto a camera module, the reference in the vision component is also set to the new vision application. This means that after restarting the controller, the last vision application successfully loaded via a function block is applied to the camera again.
Function block
Fig.: Function block ViBaseLoadApplication