说明

由于摄像机的内部任务仍在进行中，摄像机系统版本检查被延迟。

反应

不能保证作业已成功完成。

原因和解决方法

在内部任务仍处于活动状态时重启了 PLC。

在重新启动 PLC 之前（由于热重启、冷重启、服务启动或任何类型的关机/重启），请确保当时

- 没有将视觉应用程序加载到摄像机、

- 没有将视觉应用程序保存到 PLC、

- 未执行摄像机系统版本检查

- 没有激活 mapp Vision 库的功能块。

是否正在检查摄像机系统版本以及是否正在加载视觉应用程序，可通过检查该摄像机的 I/O Datapoint CameraStatus 来验证。

保存 Visiona 应用程序过程的开始和结束都会在日志中记录。

严重程度

警告

Description

Camera system version check is delayed due to a still active internal job on the camera.

Reaction

It is not garanteed that the job finished successfully.

Cause and remedy

The PLC was rebooted while an internal job was still active.

Before carrying out a reboot of the PLC (due to a Warm Restart, Cold Restart, Service Boot , any kind of shutdown / restart in general) make sure that at that time:

- no Vision Application is being loaded to a camera,

- no Vision Application is being saved to the PLC,

- no camera system version check is being performed,

- no function block of a mapp Vision library is being active.

Whether a camera system version is being checked or not and whether a Vision Application is being loaded or not, can be verified by checking the I/O Datapoint CameraStatus of that camera.

The start and finish of the process of saving a Visiona Application is entered with concatenated logbook entries.

Severity

Warning

-2118909912: Camera system version check is delayed due to a still active internal job on the camera.