<< 点击显示目录 >> 主页  mappVision帮助助手 > 机器视觉帮助 > mapp Vision  > 诊断 > 状态编号 > 运行时信息的状态编号

本节主题/Topics in this section:

•1102315521: 已使用 mapp Vision 版本： {主要}.{次要}.{修正错误}.

•28573698: {调试信息｝

•1102315522: {调试信息｝

•-2118909950: {调试信息｝

•-1045168126： {调试信息｝

•-1045168125：创建大小为 {EventLogSize} kB 的事件日志"{EventLogName}"失败。

•-1045168124：为 Vision 映射 FileDevice 时出错。

•-1045168123: 意外错误。

•-1045168122：无法打开自动化组件。

•-1045168121：无法读取自动化组件属性

•-1045168120: 自动化组件属性无法写入。

•-2118909943: Cosy 属性为空。

•-1045168118：内存不足。

•-2118909941: 无数据

•1102315532：准备接收摄像机的日志信息。

•-1045168116: 无法从摄像机接收日志条目。

•-1045168115：无法删除自动化组件。

•-1045168114：无法创建自动化组件。

•-1045168113: 自动化组件无法持久化。

•-1045168108: 读取文件 {ErrorCode} 失败。

•-1045168107: 写入文件失败 {ErrorCode}。

•-1045168106：访问文件设备失败 {ErrorCode}。

•-1045168105：文件系统中出现常规错误 {ErrorCode}。

•-1045168104：复制目录失败 {ErrorCode}。

•-2118909927: 要删除的目录不存在。

•-1045168103：删除目录 {ErrorCode} 失败。

•-1045168098: WsProxy 未实例化。内存不足。

•1102315560: 摄像机上活动内部任务的元数据。

•-2118909912: 由于摄像机上仍有活动的内部任务，摄像机系统版本检查被延迟。

•-1045168088：{任务编号}中的内部错误，错误代码： {错误代码｝

•-1045168087: 任务 {JobNumber} 中出现内部通信错误，错误代码为 {ErrorCode}： 错误代码：{ErrorCode}。

•1102315562: 空 JSON 字符串。

•-1045168086：内部解析错误。

•-1045168085：内部通信内存不足。

•-1045168084：自上次调用功能块后，视觉组件引用已更改。

•-1045168083：视觉组件引用无效。

•-1045168082: 在没有有效接口的情况下调用了功能块。

•-1045168081: 输入参数"{参数名}"无效。

•-1045168080: 解析文件'{FileName}'时出错。

•-1045168079: Vision 组件中的一般错误。

•28573746: 成功创建 Vision 组件。

•-1045168078：未创建 Vision 组件。

•-1045168077: 识别 IP / 子网掩码失败。

•28573748: 已应用网络设置。

•-1045168076: 应用网络设置失败。

•1102315573: Vision 组件已断开连接。

•28573750: Vision 组件已连接。

•28573751: Vision 组件已就绪。

•-1045168073: 视觉组件未就绪。

•28573752: 摄像机系统已更新。

•1102315576: 摄像机系统版本检查。

•-1045168072: 摄像机系统不是最新版本。

•-2118909895: IO 通道 '{ChannelID}' 不是强制的。

•-1045168071: 未找到 IO 通道 '{ChannelID}'。

•-2118909894: 在模拟目标上无法使用视觉组件。

•28573755：准备进行摄像机系统版本检查。

•-1045168069: 由于内部错误，无法进行摄像机系统版本检查。

•-1045168029：在没有有效接口的情况下调用了功能块。

•1102315620: 调用了功能块"{FBName}"。

•-1045168028：函数块"{FBName}"的执行超时。

•1102315623：调用了方法"{CommandName}"。

•-1045168025: 正在调用 OpcUa 方法。

•1102315624: 获取图像。

•-1045168023: 该视觉组件的功能块"{FBName}"实例已处于活动状态。

•1102315626：已连接 mapp Vision HMI。准备在 mapp Vision HMI 中进行配置。请暂停机器运行。

•1102315627：准备在 mapp Vision HMI 中进行配置。

•28573804: 与 mapp Vision HMI 的连接已完全建立。准备配置。

•1102315629: mapp Vision HMI 已断开连接。准备机器运行。

•28573806: 与 mapp Vision HMI 的连接已完全终止。准备进行机器操作。

•-1045168009: 视觉应用程序"{VisionApplicationName}"与相关硬件模块不兼容。图像尺寸 + 偏移量超出传感器限制。

•-1045168008: 视觉应用程序"{CurrentVisionApplicationName}"与"{ToBeLoadedVisionApplicationName}"不兼容。

•-1045168007: 无法更改为 Vision 应用程序"{VisionApplicationName}"。兼容性信息不可用。

•-1045168006: Vision 应用程序'{VisionApplicationName}'与'{VisionApplicationName}'不兼容。原因：为属性"{PropertyName}"配置的值不同。

•28573819： 已成功加载 Vision 应用程序"{VisionApplicationName}"。

•1102315643: 正在加载 Vision 应用程序"{VisionApplicationName}"。

•-2118909829：已加载 Vision 应用程序"{VisionApplicationName}"并进行了更正。

•-1045168005: 加载 Vision 应用程序"{VisionApplicationName}"失败。

•28573820: 已成功保存 "VisionApplicationName}"。

•1102315644：保存 Vision 应用程序"{VisionApplicationName}"。

•-1045168004: 保存 Vision 应用程序"{VisionApplicationName}"失败。

•-1045168003: 未保存 Vision 函数执行号"{执行号}"的数据集"{数据集名称}"。

•-2118909826：未确认 Vision 应用程序传输完成。

•-1045168002: 未应用 Vision Application。

•-1045168001：无法启动 Vision 应用程序的传输。

•-1045168000：无法执行"{CommandName}"命令，因为上次加载 Vision 应用程序失败。

•-2118909822: 参数"{ParameterName}"的配置值"{ConfiguredValue}"被修改为"{AppliedValue}"。

•-1045167998：无法读取图像采集参数'{参数名称}'。

•-1045167997：无法写入图像采集参数"{参数名称}"。

•-1045167996: 摄像机应用图像采集配置的时间过长。(请参阅 CameraStatus）。

•-1045167988: 无法读取视觉应用程序"{VisionApplicationName}"的文件。

•-1045167987: 视觉应用程序"{VisionApplicationName}"被视觉组件"{VisionComponentName}"使用。

•28573838: 已成功删除 Vision 应用程序"{VisionApplicationName}"。

•-1045167986: 删除 Vision 应用程序"{VisionApplicationName}"失败。

•-1045167984: 由于 mapp Vision HMI 已连接到摄像机，因此无法执行"{CommandName}"命令。

•-1045167983: 由于摄像机处于机器运行模式（未连接 mapp Vision HMI），因此无法执行命令"{CommandName}"。

•1102315666: 可列出的 Vision 应用程序数量"{NrEntries}"超过了所提供字符串数组"{BufferLen}"的大小。

•28573843: 已成功检索在网络时间 {NetTime} 获取的图像，数据大小为 {BufferLen} 字节。

•1102315667: 以 {Type}{QualityLevel} 的格式检索摄像机最后获取的图像。

•-1045167981: 检索图像失败。

•-1045167980: 摄像机上没有可用图像。

•-1045167979: 在 NetTime {NetTime} 获取的图像至少需要 {BufferLen} 字节的内存，超出了所提供的数据缓冲区大小 {BufferSize} 字节。

•-1045167978: 未加载 Vision 函数执行号"{执行号}"的数据集"{数据集名称}

•-1045167977: 无法加载视觉应用程序"{VisionApplicationName}"，因为相机模块的功能"{UnavailableFeature}"不可用。

•-1045167968: Vision Application '{VisionApplicationName}' 不存在。

•-1045167967: 视觉应用程序 '{EnteredVisionApplicationName}' 已经存在。

•-1045167966: {EnteredVisionApplicationName}'不是 Vision 应用程序的有效名称。

•-1045167947：mapp 轴未配置为触发源或未配置轴参照。

•-1045167946: 触发源配置中的轴参考 '{AxisName}' 无效。

•-1045167945: DefaultPositionCompensation 的值不可用。

•-1045167943: 无法循环读取轴位置。MC_BR_ReadCyclicPosition ErrorID = {ErrorCode} （错误代码

•-1045167942: 无法读取轴的速度。MC_ReadActualVelocity ErrorID = {ErrorCode} -1045167942: 无法读取轴的速度。

•-1045167941: 无法读取轴周期或轴分辨率。MC_ReadParameter ErrorID = {ErrorCode} -1045167940: 无法读取轴周期或轴分辨率。

•-1045167940: 起始位置不能通过更新更改。

•-1045167939: DisableNegativeDirection（禁用负方向）不能通过更新更改

•-1045167938: 轴未归位。

•-1045167937: 轴未初始化。

•-1045167936: 由于命令"{CommandName}"处于活动状态，无法强制采集图像。

•-1045167935: 由于命令"{CommandName}"处于激活状态，无法在位置"{AcquisitionPosition}"上以计算时间戳"{NetTime}"为基础采集轴图像。

•-1045167934: 由于前一个图像采集尚未完成，因此无法强制采集图像。

•-1045167933: 无法在位置"{AcquisitionPosition}"处以计算时间戳"{NetTime}"进行基于轴的图像采集，因为上一次图像采集尚未完成。

•-1045167932: 无法强制采集图像，因为摄像机状态"{CameraStatus}"尚未就绪。

•-1045167931: 由于摄像机状态"{CameraStatus}"尚未就绪，因此无法在位置"{AcquisitionPosition}"上以计算的时间戳"{NetTime}"进行基于轴的图像采集。

•-1045167930: DefaultPositionCompensation（默认位置补偿）的值为负。

•-1045167929: 由于 mapp Vision HMI 已连接到摄像机，因此无法强制采集图像。

•-1045167928: 由于 mapp Vision HMI 已连接到摄像机，因此无法在位置"{AcquisitionPosition}"上以计算的时间戳"{NetTime}"进行基于轴的图像采集。

•1102315721：触发 ResetAcquisition 以重置尚未完成的采集。

•28573919: 智能灯光"{ModuleName}"已连接。

•1102315743：在地址"{Address}"处找到智能灯。

•-1045167905: 链接智能灯"{ModuleName}"到 Vision 组件"{VisionComponentName}"失败。

---

本节主题/Topics in this section:

•1102315521: Used mapp Vision version: {Major}.{Minor}.{Bugfix}

•28573698: {DebugMessage}

•1102315522: {DebugMessage}

•-2118909950: {DebugMessage}

•-1045168126: {DebugMessage}

•-1045168125: Creating event log '{EventLogName}' with size of {EventLogSize} kB failed.

•-1045168124: Error mapping FileDevice for Vision.

•-1045168123: Unexpected error.

•-1045168122: Automation Component could not be opened.

•-1045168121: Automation Component property could not be read

•-1045168120: Automation Component property could not be written.

•-2118909943: Cosy Property is empty.

•-1045168118: Out of memory.

•-2118909941: No data

•1102315532: Ready to receive log messages from camera.

•-1045168116: Cannot receive log entries from camera.

•-1045168115: Automation Component could not be deleted.

•-1045168114: Automation Component could not be created.

•-1045168113: Automation Component could not be persisted.

•-1045168108: Failure reading file {ErrorCode}.

•-1045168107: Failure writing file {ErrorCode}.

•-1045168106: Failure accessing file device {ErrorCode}.

•-1045168105: General error {ErrorCode} in file system.

•-1045168104: Failure duplicating directory {ErrorCode}.

•-2118909927: The directory to be deleted does not exist.

•-1045168103: Failure deleting directory {ErrorCode}.

•-1045168098: WsProxy not instantiated. Insufficient memory.

•1102315560: Metadata of the active internal job on the camera.

•-2118909912: Camera system version check is delayed due to a still active internal job on the camera.

•-1045168088: Internal error in job {JobNumber}, error code: {ErrorCode}

•-1045168087: Internal communication error in job {JobNumber}, error code: {ErrorCode}.

•1102315562: Empty JSON String.

•-1045168086: Internal parse error.

•-1045168085: Insufficient memory for internal communication.

•-1045168084: The vision component reference was changed since last function block call.

•-1045168083: The vision component reference is invalid.

•-1045168082: The function block was called without a valid interface.

•-1045168081: Invalid input parameter '{ParameterName}'.

•-1045168080: Error parsing file '{FileName}'.

•-1045168079: General error in Vision Component.

•28573746: Vision Component was created successfully.

•-1045168078: Vision Component was not created.

•-1045168077: Failure identifying IP / subnet mask.

•28573748: Network settings applied.

•-1045168076: Failure applying network settings.

•1102315573: Vision Component was disconnected.

•28573750: Vision Component is connected.

•28573751: Vision Component is ready.

•-1045168073: Vision Component is not ready.

•28573752: Camera system up to date.

•1102315576: Camera system version check.

•-1045168072: Camera system not up to date.

•-2118909895: IO channel '{ChannelID}' is not forced.

•-1045168071: IO channel '{ChannelID}' not found.

•-2118909894: The vision component is not usable on the simulated target.

•28573755: Ready for camera system version check.

•-1045168069: Camera system version check impossible due to an internal error.

•-1045168029: The function block was called without a valid interface.

•1102315620: Function block '{FBName}' called.

•-1045168028: The execution of the function block '{FBName}' timed out.

•1102315623: Method '{CommandName}' called.

•-1045168025: OpcUa method call in progress.

•1102315624: Acquire image.

•-1045168023: There is already an instance of the function block '{FBName}' active for this Vision Component.

•1102315626: The mapp Vision HMI has been connected. Preparing for configuration in the mapp Vision HMI. Please pause machine operation.

•1102315627: Preparing for configuration in the mapp Vision HMI.

•28573804: Connection to the mapp Vision HMI is fully established. Ready for configuration.

•1102315629: The mapp Vision HMI has been disconnected. Preparing for machine operation.

•28573806: Connection to the mapp Vision HMI is fully terminated. Ready for machine operation.

•-1045168009: Vision Application '{VisionApplicationName}' is not compatible with the associated hardware module. Image size + offset exceeds the sensor limits.

•-1045168008: Vision Application '{CurrentVisionApplicationName}' not compatible to '{ToBeLoadedVisionApplicationName}'.

•-1045168007: Cannot change to Vision Application '{VisionApplicationName}'. Compatibility information not available.

•-1045168006: Vision Application '{VisionApplicationName}' not compatible to '{VisionApplicationName}'. Reason: different values configured for property '{PropertyName}'.

•28573819: Vision Application '{VisionApplicationName}' was loaded successfully.

•1102315643: Loading Vision Application '{VisionApplicationName}'.

•-2118909829: Vision Application '{VisionApplicationName}' was loaded with corrections.

•-1045168005: Failure loading Vision Application '{VisionApplicationName}'.

•28573820: Vision Application '{VisionApplicationName}' was saved successfully.

•1102315644: Saving Vision Application '{VisionApplicationName}'.

•-1045168004: Failure saving Vision Application '{VisionApplicationName}'.

•-1045168003: Dataset '{DatasetName}' of Vision Function execution number '{ExecutionNumber}' was not saved.

•-2118909826: Vision Application transfer completion not confirmed.

•-1045168002: Vision Application not applied.

•-1045168001: Could not initate transfer of Vision Application.

•-1045168000: Command '{CommandName}' cannot be executed because the last load of the Vision Application has failed.

•-2118909822: For parameter '{ParameterName}' the configured value '{ConfiguredValue}' was amended to '{AppliedValue}'.

•-1045167998: Image acquisition parameter '{ParameterName}' could not be read.

•-1045167997: Image acquisition parameter '{ParameterName}' could not be written.

•-1045167996: Camera took too long to apply image acquisition configuration. (see CameraStatus).

•-1045167988: File of Vision Application '{VisionApplicationName}' could not be read.

•-1045167987: Vision Application '{VisionApplicationName}' is used by Vision Component '{VisionComponentName}'.

•28573838: Vision Application '{VisionApplicationName}' was deleted successfully.

•-1045167986: Failure deleting Vision Application '{VisionApplicationName}'.

•-1045167984: Command '{CommandName}' cannot be executed because the mapp Vision HMI is connected to the camera.

•-1045167983: Command '{CommandName}' cannot be executed because the camera is in machine operation mode (mapp Vision HMI not connected).

•1102315666: The number of listable Vision Applications '{NrEntries}' exceeds the size of the provided String array '{BufferLen}'.

•28573843: The image acquired at NetTime {NetTime} was successfully retrieved with a data size of {BufferLen} bytes.

•1102315667: Retrieving the last acquired image from the camera as {Type}{QualityLevel}.

•-1045167981: Failure retrieving the image.

•-1045167980: No image available on camera.

•-1045167979: The image acquired at NetTime {NetTime} requires at least {BufferLen} bytes of memory, which exceeds the provided data buffer size of {BufferSize} bytes.

•-1045167978: Dataset '{DatasetName}' of Vision Function execution number '{ExecutionNumber}' was not loaded

•-1045167977: Vision Application '{VisionApplicationName}' cannot be loaded because the feature '{UnavailableFeature}' is not available for the camera module.

•-1045167968: Vision Application '{VisionApplicationName}' does not exist.

•-1045167967: Vision Application '{EnteredVisionApplicationName}' already exists.

•-1045167966: {EnteredVisionApplicationName}' is not a valid name for a Vision Application.

•-1045167947: mapp Axis is not configured as Trigger Source or no axis reference configured.

•-1045167946: Axis reference '{AxisName}' in Trigger Source configuration was invalid.

•-1045167945: The value for DefaultPositionCompensation was not available.

•-1045167943: Axis position can not be read cyclically. MC_BR_ReadCyclicPosition ErrorID = {ErrorCode}

•-1045167942: Axis velocity can not be read. MC_ReadActualVelocity ErrorID = {ErrorCode}

•-1045167941: Axis period or axis resolution could not be read. MC_ReadParameter ErrorID = {ErrorCode}

•-1045167940: The StartPosition must not be changed by an Update.

•-1045167939: DisableNegativeDirection must not be changed by an Update

•-1045167938: Axis is not homed.

•-1045167937: Axis is not initialized.

•-1045167936: The forced image acquisition is not possible due to the command '{CommandName}' being active.

•-1045167935: The axis-based image acquisition at position '{AcquisitionPosition}' with calculated timestamp '{NetTime}' is not possible due to the command '{CommandName}' being active.

•-1045167934: The forced image acquisition is not possible because the previous image acquisition has not yet been completed.

•-1045167933: The axis-based image acquisition at position '{AcquisitionPosition}' with calculated timestamp '{NetTime}' is not possible because the previous image acquisition has not yet been completed.

•-1045167932: The forced image acquisition is not possible because the camera is not ready with status '{CameraStatus}'.

•-1045167931: The axis-based image acquisition at position '{AcquisitionPosition}' with calculated timestamp '{NetTime}' is not possible because the camera is not ready with status '{CameraStatus}'.

•-1045167930: The value for DefaultPositionCompensation is negative.

•-1045167929: The forced image acquisition is not possible because the mapp Vision HMI is connected to the camera.

•-1045167928: The axis-based image acquisition at position '{AcquisitionPosition}' with calculated timestamp '{NetTime}' is not possible because the mapp Vision HMI is connected to the camera.

•1102315721: Triggered ResetAcquisition to reset a not yet completed acquisition.

•28573919: SmartLight '{ModuleName}' linked.

•1102315743: SmartLight found at address '{Address}'.

•-1045167905: Failed linking SmartLight '{ModuleName}' to Vision Component '{VisionComponentName}'.