|
<< 点击显示目录 >> 主页 mappVision帮助助手 > 机器视觉帮助 > mapp Vision > 编程 > mapp Vision 人机界面应用 |
mapp Vision HMI 应用程序基于网络，以 mapp View 为基础，用于配置视觉功能。
如果 HMI 应用程序连接到摄像头，mapp Vision 将使用该摄像头的某些数据点。这可能会干扰用户应用程序！
同时，HMI 应用程序会受到用户应用程序或通过 I/O 映射进行的操作的干扰。因此强烈建议在 HMI 应用程序打开时不要影响摄像机的 I/O 数据点。
摄像机状态数据点表示 HMI 应用程序是否打开。有关详细信息，请参阅CameraStatus。
注意！
当摄像机处于忙碌状态时，不允许关闭页面或通过刷新浏览器更新页面。mapp Vision HMI 应用程序设计为使用 HMI 应用程序中的按钮和下拉框进行导航。
有关在没有摄像机硬件的情况下使用 mapp Vision HMI 应用程序的信息，请参阅脱机 HMI 应用程序。
•开始使用
•一般信息
•参数化
•诊断
•柱状图
The mapp Vision HMI application is web-based and based on mapp View, which is used for configuring vision functions.
If the HMI application is connected to a camera, mapp Vision uses some data points from this camera. This can disrupt user applications!
At the same time, the HMI application is disturbed by user applications or operation via the I/O mapping. It is therefore strongly recommended that the I/O data points of the camera are not affected while the HMI application is open.
The data point for the camera status indicates whether the HMI application is open. For more detailed information, see CameraStatus.
Caution!
While the camera is busy, the page is not permitted to be closed or updated via browser refresh. The mapp Vision HMI application is designed to be navigated using the buttons and drop-down boxes available in the HMI application.
For information about using the mapp Vision HMI application without camera hardware, see Offline HMI application.