mapp 技术软件包 - 一般信息

•保存和加载视觉程序

o在控制器和摄像机之间传输视觉软件时，会进行新的检查，以确定哪些文件是不同的；只有这些文件才会被传输。这样可以加快保存和加载视觉程序的速度。

重启控制器后首次加载视觉程序时，仍会完全重新加载。

mapp Vision 人机界面应用程序

•参数化

o更新了示教模型和发现结果的图形显示。有关更多信息，请参阅图标对象。

o现在还可以在 mapp Vision HMI 应用程序中按型号筛选视觉功能的结果。有关其他信息，请参阅过滤视觉功能结果。

o通过视觉功能 OCR，现在只有当执行 ROI 处于编辑模式时，角度输入工具才能在 mapp Vision HMI 应用程序中显示。

•人机界面应用程序

omapp Vision HMI 应用程序启用了自动缩放模式。

omapp Vision HMI 应用程序现在还可以嵌入到用户定义的 mapp View HMI 应用程序中。有关说明，请参阅嵌入mapp View HMI 应用程序。

视觉功能 - 代码读取器

C2dModuleGapMin/Max 参数并非在所有情况下都能正确设置，即使在使用预定义参数集时也是如此。现已纠正。

解决方法：未知。

视觉函数 - ModelBasedBlob

教入不带标记和默认参数的模型会导致异常。现已更正。

mapp Technology Package - General information

•Saving and loading a vision application

oWhen transferring a Vision Application between the controller and camera, a new check is carried to see which files are different; only these are transferred. This can speed up the saving and loading of a vision application.

The first time a vision application is loaded after restarting the controller, it is still reloaded completely.

mapp Vision HMI application

•Parameterization

oThe graphical representation of teach-in models and found results has been updated. For additional information, see Iconic objects.

oThe results of a vision function can now also be filtered by model number in the mapp Vision HMI application. For additional information, see Filtering the results of a vision function.

oWith vision function OCR, the angle input tool is now only visible in the mapp Vision HMI application when the Execution ROI is in edit mode.

•HMI application

oAutomatic zoom mode has been enabled for the mapp Vision HMI application.

oThe mapp Vision HMI application can now also be embedded in user-defined mapp View HMI applications. For instructions, see Embedding in a mapp View HMI application.

Vision function - CodeReader

The C2dModuleGapMin/Max parameters were not set correctly in all cases, even when using predefined parameter sets. This has now been corrected.

Workaround: Not known.

Vision function - ModelBasedBlob

Teaching-in a model without markers and default parameters resulted in an exception. This has now been corrected.